The RF7C-E40 Photoluminescent Anodized Aluminum Stair Nosing is designed to be installed flush with resilient flooring. It provides step edge visibility and enhances egress speed in all light conditions. The RF7C-E40 has an 85 degree angle.
LEED points qualified
Zero energy consumption
Non-Radioactive and Non-toxic
Recyclable; No disposable cost
Step Edge Safety
The color contrasting the non-slip material with advanced photoluminescent technology provides step edge visibility in all light conditions.
The unique ridges in the Ecoglo® photoluminescent strips and the integrated anti-slip contrast strips provide all-weather slip resistance.
Engineered for Durability
Manufactured using Ecoglo’s patented process which produces the most durable and highly efficient photoluminescent product available.
Unique ridges in the photoluminescent strips protect it from most abrasive wear. They provide slip resistance while still allowing the product to be easily cleaned.
The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
The thick anodized finish is aesthetically pleasing, prevents corrosion, and is extremely hard and abrasion resistant. The anodized aluminum surface is harder than pure aluminum, second only to diamonds hard crystalline structure.
For Indoor Use and Outdoor Use
Tested to accelerated UV/weathering exposure, and proven to be highly resistant to the effects of UV/weathering.
The loss in performance is less than can be detected by the human eye when subjected to 6000 hours of UV exposure, which is similar to 30 years of outdoor exposure.
The polymer used in Ecoglo’s patented process is “long chain” which forms a strong UV resistant product when bonding.
Install flush with resilient flooring using adhesive and mechanical fasteners
Countersunk pre-drilled holes. Includes stainless steel fasteners and concrete nylon anchors. Standard location is 2″ from each end and approx. 12″ apart.
Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
Inserts are supplied unattached. Inserts are installed over the mechanical fasteners using a polyurethane adhesive (included). Inserts can be cut using a shear. Aluminum nosings are cut with a saw. Cutting inserts with saw will damage the saw blade.
Weight: 0.586 lbs/ft.
Available in Clear Anodized Aluminum Finish
Black, Light Bronze and, Dark Bronze Anodize finishes are available at an additional cost
*Made in USA
Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
Products are Aluminum based and 100% recyclable.
MR Credit 4: Recycled Content
Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.
Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1