F6-E20 Photoluminescent flat Stair Nosing

The F6-E20 Photluminescent Flat Stair Nosing provides an extra level of safety, without distracting from the design of your building. The sleek aluminum profile modernizes and renovates any facility, while keeping occupants safe. Ecoglo®’s expertly engineered photoluminescent strip has been integrally bonded into this aluminum stair nosing to provide a reliable source of egress lighting. Simply gaining a charge from either a natural or artificial light source, this luminous egress path marking product is ready to glow brightly for hours after the power has failed. To best serve your project needs, Ecoglo®’s aluminum stair nosing can easily be installed on a range of substrates including concrete, timber, tiles, steel, checker plate and thin carpet.

Ecoglo® has perfected our patented manufacturing process to bring you the most-cost effective, industry-leading product on the market. Our products not only meet code compliance but exceed luminous egress requirements set out in local and international building, fire and life safety codes.

Downloads:

Ecoglo F6-E20 luminescent Flat Stair Treads
Ecoglo F6171 luminescent Aluminum Flat Stair Tread
F6171 (Black)
Ecoglo F6161 luminescent Aluminum Flat Stair Nosing
F6161 (Grey)
Ecoglo F6151 luminescent Aluminum Flat Stair Nosing
F6151 (Yellow)

General Information

  • Install with polyurethane adhesive and mechanical fasteners, or adhesive only.
  • Supplied with pre-drilled countersunk holes. Includes stainless steel fasteners and concrete nylon anchors. Standard location is 2″ from each end and approx. 12″ apart.
  • Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
  • Inserts Attached or Unattached – Unattached is recommended for on-site cutting. Inserts are installed with a premium polyurethane adhesive.
  • Weight: 0.46 lbs/ft.


Aluminum Finish

  • Available in Clear Anodized Aluminum Finish
  • Black, Light Bronze and, Dark Bronze Anodize finishes are available at an additional cost
Ecoglo F6-E20 luminescent Flat Stair Nosing Dimensions
Metal Stair Nosing Engineered for Durability
  • Manufactured using Ecoglo’s patented process which produces the most durable and highly efficient photoluminescent product available.
  • Unique ridges in the photoluminescent strips protect it from most abrasive wear. They provide slip resistance while still allowing the product to be easily cleaned.
  • The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
  • The thick anodized finish is aesthetically pleasing, prevents corrosion, and is extremely hard and abrasion resistant. The anodized aluminum surface is harder than pure aluminum, second only to diamonds hard crystalline structure.
Step Edge Safety
  • The color contrasting the non-slip material with advanced photoluminescent technology provides step edge visibility in all light conditions.
  • The unique ridges in the Ecoglo® photoluminescent strips and the integrated anti-slip contrast strips provide all-weather slip resistance.
For Indoor Use and Outdoor Use
  • Tested to accelerated UV/weathering exposure, and proven to be highly resistant to the effects of UV/weathering.
  • The loss in performance is less than can be detected by the human eye when subjected to 6000 hours of UV exposure, which is similar to 30 years of outdoor exposure.
  • The polymer used in Ecoglo’s patented process is “long chain” which forms a strong UV resistant product when bonding.
Environmentally Friendly

Photos

Ecoglo F6171 luminous Flat Stair Tread
F6171 (Black)
Ecoglo F6161 luminous Aluminum Flat Stair Tread
F6161 (Grey)
Ecoglo F6151 luminous Aluminum Flat Stair Nosing
F6151 (Yellow)

Leed Data

Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Benefits And Technical Data

Ecoglo F6-E20 meets or exceeds the performance criteria specified in the following tests or standards:

Brightness

High visibility in dark or light conditions.

  • ASTM E2073-19a Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
  • DIN 67510 Part 1 Phosphorescent Pigments and Products: Measurement and identification by the manufacturer.
  • ISO 17398:2004 Clause 7.11 Safety Colors and Safety Signs- Classification, Performance and Durability of Safety Signs.
UV Stability

High durability indoors and outdoors.

  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87 Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Abrasion Resistant Stair Nosing

Hard wearing.

  • ASTM D1242-95a Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM B 244-09 Test Methods for Measurement of Anodic Coatings on Aluminum and other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments.
  • ASTM B137-95 Test Method for Measurement of Coating Mass per Unit Area of Anodically Coated Aluminum.
  • ASTM F510-14 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1 Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Abrasive-wheel-wear abrasion resistance test.
Washability

Easy Cleaning.

  • ASTM D4828-94 (2016) Standard Test Methods for Practical Washability of Organic Coatings.
  • ASTM B136-84 Standard Test Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum.
Slip Resistant Flat Stair Nosing

Hard-wearing photoluminescent strips that won’t deteriorate under heavy usage.

  • UL410 Standard for Slip Resistance of Floor Surface Materials
  • AS/NZS 4586 Slip Resistance Classification of New Pedestrian Surface Materials.
Radioactivity

No radioactivity or toxicity.

Flammability

Does not burn.

  • ASTM E162-16 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-18 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.