CAD DETAILS BIM READY | DOWNLOAD CATALOG 1-888-679-4022

Ecoglo

F5101 Photoluminescent Flat Stair Nosings

The F5101 Photoluminescent Flat Stair Nosing provides step edge visibility and enhances egress speed in all light conditions.

Environmentally Friendly
  • LEED points qualified
  • Zero energy consumption
  • Non-Radioactive and Non-toxic
  • Recyclable; No disposable cost
Step Edge Safety
  • The unique ridges in the Ecoglo® photoluminescent strips and ridges in the aluminum stair nosing provide all-weather slip resistance.
Engineered for Durability
  • Manufactured using Ecoglo’s patented process which produces the most durable and highly efficient photoluminescent product available.
  • Unique ridges in the photoluminescent strips protect it from most abrasive wear. They provide slip resistance while still allowing the product to be easily cleaned.
  • The thick anodized finish is aesthetically pleasing, prevents corrosion, and is extremely hard and abrasion resistant. The anodized aluminum surface is harder than pure aluminum, second only to diamonds hard crystalline structure.
For Indoor Use and Outdoor Use
  • Tested to accelerated UV/weathering exposure, and proven to be highly resistant to the effects of UV/weathering.
  • The loss in performance is less than can be detected by the human eye when subjected to 6000 hours of UV exposure, which is similar to 30 years of outdoor exposure.
  • The polymer used in Ecoglo’s patented process is “long chain” which forms a strong UV resistant product when bonding.

General Information

  • Designed to be installed with a premium polyurethane adhesive only. Mechanical fasteners are optional.
  • Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
  • Supplied with photoluminescent inserts attached
  • Weight: 0.334 lbs/ft.

Aluminum Finish:
  • Available in Clear Anodized Aluminum Finish
  • Black, Light Bronze and, Dark Bronze Anodize finish are available at an additional cost

Dimensions

Leed Data

Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Attachments

Building, Fire, And Life Safety Codes

The Ecoglo F5101 meets the following Building, Fire & Life Safety Codes:

  • IBC/IFC 2009, 2012 (Section 1024 – Luminous Egress Path Markings) and 2015 (Section 1025)
  • NFPA 101-2009 and 170-2009
  • NYC LL 141 of 2013 (Section BC 1024 Luminous Egress Path Markings)
  • NYC LL 26 of 2004 Reference Standard 6-1
  • California Building Code Section 1024 Exit Passageways
  • Connecticut State Fire Safety Code Section 1026 Floor Proximity Egress Path Markings

Benefits And Technical Data

Ecoglo F5101 meets or exceeds the performance criteria specified in the following tests or standards:
Brightness
High visibility in dark or light conditions.
  • ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
  • DIN 67510 Part 1, Phosphorescent Pigments and Products: Measurement and identification by the manufacturer.
  • ISO 17398:2004 Clause 7.11, Safety Colors and Safety Signs- Classification, Performance and Durability of Safety Signs.
UV Stability
High durability indoors and outdoors.
  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Abrasion Resistance
Hard wearing.
  • ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM B 244-97, Test Methods for Measurement of Anodic Coatings on Aluminum and other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments.
  • ASTM B137-95(2000), Test Method for Measurement of Coating Mass per Unit Area of Anodically Coated Aluminum.
  • ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.
Washability
Easy Cleaning.
  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.
  • ASTM B136-84(1998), Standard Test Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum.
Radioactivity
No radioactivity or toxicity.
  • ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity.
  • Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.
Flammability
Does not burn.
  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.