S4-N30 CAST IN PLACE STAIR NOSING

The S4-N30 Non-Slip Anodized Stair Nosings provide step edge color contrast, long-lasting anti-slip protection and beautiful appearance. The S4-N30 provide an affordable way to renovate and modernize worn stairways and improve stairway safety.

Engineered for Durability

  • The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.

Step Edge Safety

  • The color contrasting the non-slip material provides excellent step edge visibility

Environmentally Friendly

  • LEED points qualified
  • Recyclable; No disposable cost

For Indoor Use and Outdoor Use

  • Tested to accelerated UV/weathering exposure, Salt Spray Resistance, Freeze-Thaw Resistance and Washability. Ecoglo products easily passed with excellent results.
  • Install into wet concrete. Used on concrete stairs, concrete-filled steel pan stairs, and pre-cast concrete stairs.
  • Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
  • Inserts Attached or Unattached – Inserts unattached can be installed later to ensure the product is clean and has not been damaged during construction. Inserts are installed with a premium polyurethane adhesive.
  • A clear protective tape wraps around the product to keep the product clean during installation. To remove, cut the tape along the edges and peel away.
  • Weight: 0.494 lbs/ft.

Aluminum Finish:

  • 6063-T5 Mill finish aluminum with acrylic lacquer finish to prevent corrosion.

*Made in USA

Benefits and Technical Details: Ecoglo S4-N30 meets or exceeds the performance criteria specified in the following tests or standards:

UV Stability

High durability indoors and outdoors.

  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling

Slip Resistant

Reduces slips.

  • UL410, Standard for Slip Resistance for Floor Surface Materials.
  • AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials.

Abrasion Resistance

Hard wearing.

  • ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.

Washability

Easy Cleaning.

  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.

Flammability

Does not burn.

  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.
Qualifies for LEED Points

MR Credit 2: Construction Waste Management Divert from Land Fill

  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content

  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1