S4-E30 Photoluminescent Cast in Place Stair Nosing

The S4-E30 Photoluminescent Cast in Place nosing provides step edge visibility and enhances egress speed in all light conditions.

Environmentally Friendly

LEED points qualified
Zero energy consumption
Non-Radioactive and Non-toxic
Recyclable; No disposable cost

Step Edge Safety

The color contrasting the non-slip material with advanced photoluminescent technology provides step edge visibility in all light conditions.
The unique ridges in the Ecoglo^® photoluminescent strips and the integrated anti-slip contrast strips provide all-weather slip resistance.

Engineered for Durability

Manufactured using Ecoglo’s patented process which produces the most durable and highly efficient photoluminescent product available.
Unique ridges in the photoluminescent strips protect it from most abrasive wear. They provide slip resistance while still allowing the product to be easily cleaned.
The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.

For Indoor Use and Outdoor Use

Tested to accelerated UV/weathering exposure, and proven to be highly resistant to the effects of UV/weathering.
The loss in performance is less than can be detected by the human eye when subjected to 6000 hours of UV exposure, which is similar to 30 years of outdoor exposure.
The polymer used in Ecoglo’s patented process is “long chain” which forms a strong UV resistant product when bonding.

General Information

Install into wet concrete. Used on concrete stairs, concrete-filled steel pan stairs, and pre-cast concrete stairs.
Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
Inserts Attached or Unattached – Inserts unattached can be installed later to ensure the product is clean and has not been damaged during construction. Inserts are installed with a premium polyurethane adhesive.
A clear protective tape wraps around the product to keep the product clean during installation. To remove, cut the tape along the edges and peel away.
Weight: 0.491 lbs/ft.

Aluminum Finish

6063-T5 Mill finish aluminum with a clear acrylic lacquer finish to prevent corrosion.

*Made in USA

Product Models

Dimensions

Leed Data

Qualifies for LEED Points

MR Credit 2: Construction Waste Management Divert from Land Fill
Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Attachments

Building, Fire, And Life Safety Codes

The Ecoglo S4-E30 meets the following Building, Fire & Life Safety Codes:

IBC/IFC 2009, 2012 (Section 1024 – Luminous Egress Path Markings) and 2015 (Section 1025)
NFPA 101-2009 and 170-2009
NYC LL 141 of 2013 (Section BC 1024 Luminous Egress Path Markings)
NYC LL 26 of 2004 Reference Standard 6-1
California Building Code Section 1024 Exit Passageways
Connecticut State Fire Safety Code Section 1026 Floor Proximity Egress Path Markings

Benefits And Technical Data

Ecoglo S4-E30 meets or exceeds the performance criteria specified in the following tests or standards:

Brightness

High visibility in dark or light conditions.
ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
DIN 67510 Part 1, Phosphorescent Pigments and Products: Measurement and identification by the manufacturer.
ISO 17398:2004 Clause 7.11, Safety Colors and Safety Signs- Classification, Performance and Durability of Safety Signs.

UV Stability

High durability indoors and outdoors.
ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling

Slip Resistant

Reduces slips.
UL410, Standard for Slip Resistance for Floor Surface Materials.
AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials.

Abrasion Resistance

Hard wearing.
ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.

Washability

Easy Cleaning.
ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.

Radioactivity

No radioactivity or toxicity.
ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity.
Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.

Flammability

Does not burn.
ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.