S2-E30 Photoluminescent Cast in Place nosingadmin2018-01-30T14:41:44+00:00
S2-E30 PHOTOLUMINESCENT CAST IN PLACE STAIR NOSING
The S2-E30 Photoluminescent Cast in Place nosings install into wet concrete and provide step edge visibility and enhance egress speed in all light conditions.
Engineered for Durability
Manufactured using Ecoglo’s patented process which produces the most durable and highly efficient photoluminescent product available.
Unique ridges in the photoluminescent strips protect it from most abrasive wear. They provide slip resistance while still allowing the product to be easily cleaned.
The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
The thick anodized finish is aesthetically pleasing, prevents corrosion, and is extremely hard and abrasion resistant. The anodized aluminum surface is harder than pure aluminum, second only to diamonds hard crystalline structure.
For Indoor Use and Outdoor Use
Tested to accelerated UV/weathering exposure, and proven to be highly resistant to the effects of UV/weathering.
The loss in performance is less than can be detected by the human eye when subjected to 6000 hours of UV exposure, which is similar to 30 years of outdoor exposure.
The polymer used in Ecoglo’s patented process is “long chain” which forms a strong UV resistant product when bonding.
Step Edge Safety
The color contrasting the non-slip material with advanced photoluminescent technology provides step edge visibility in all light conditions.
The unique ridges in the Ecoglo® photoluminescent strips and the integrated anti-slip contrast strips provide all-weather slip resistance.
Install into wet concrete. Used on concrete stairs, concrete-filled steel pan stairs, and pre-cast concrete stairs.
Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
Inserts Attached or Unattached – Inserts unattached can be installed later to ensure the product is clean and has not been damaged during construction. Inserts are installed with a premium polyurethane adhesive.
A clear protective tape wraps around the product to keep it clean during installation. To remove, cut the tape along the edges and peel away.
Weight: 0.513 lbs/ft.
6063-T5 Mill finish aluminum with a clear acrylic lacquer finish to prevent corrosion.