S10-E40 Photoluminescent Cast In Place Stair Nosing
The S10-E40 Photoluminescent Cast in Place nosings install into wet concrete and provide step edge visibility and enhance egress speed in all light conditions.
LEED points qualified
Zero energy consumption
Non-Radioactive and Non-toxic
Recyclable; No disposable cost
Step Edge Safety
The color contrasting the non-slip material with advanced photoluminescent technology provides step edge visibility in all light conditions.
The unique ridges in the Ecoglo® photoluminescent strips and the integrated anti-slip contrast strips provide all-weather slip resistance.
Engineered for Durability
Manufactured using Ecoglo’s patented process which produces the most durable and highly efficient photoluminescent product available.
Unique ridges in the photoluminescent strips protect it from most abrasive wear. They provide slip resistance while still allowing the product to be easily cleaned.
The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
For Indoor Use and Outdoor Use
Tested to accelerated UV/weathering exposure, and proven to be highly resistant to the effects of UV/weathering.
The loss in performance is less than can be detected by the human eye when subjected to 6000 hours of UV exposure, which is similar to 30 years of outdoor exposure.
The polymer used in Ecoglo’s patented process is “long chain” which forms a strong UV resistant product when bonding.
Install into wet concrete. Used on concrete stairs, concrete-filled steel pan stairs, and pre-cast concrete stairs. Install ½” (25mm) back from the front of the step.
Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
Inserts Attached or Unattached – Inserts unattached can be installed later to ensure the product is clean and has not been damaged during construction. Inserts are installed with a premium polyurethane adhesive.
A clear protective tape wraps around the product to keep the product clean during installation. To remove, cut the tape along the edges and peel away.
Weight: 0.276 lbs/ft.
6068-T5 Mill finish aluminum with a clear acrylic lacquer finish to prevent corrosion.
*Made in USA
Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
Products are Aluminum based and 100% recyclable.
MR Credit 4: Recycled Content
Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.
Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1