C4-E20 Photoluminescent Carpet Stair Nosing

Ecoglo®’s C4-E20 photoluminescent carpet stair nosing has been expertly engineered to enhance egress speeds, in all lighting conditions, by providing industry-leading photoluminescent technology and tough non-slip grips. This product is available as clear anodized aluminum as well as black anodized aluminum, to compliment your building’s designs, not distract from it. This luminous egress path marking product installs with polyurethane adhesive and mechanical fasteners, creating an installation strong enough to withstand the wear and tear of thousands of people walking on it.

Downloads:

Ecoglo C4-E20 Luminescent Stair Nosing for Carpet
Ecoglo C4171 Luminescent Aluminum Stair Nosing for Carpet
C4171 (Black)
Ecoglo C4161 Luminescent Aluminum Stair Nosing for Carpet
C4161 (Grey)
Ecoglo C4151 Luminescent Aluminum Stair Nosing for Carpet
C4151 (Yellow)
Ecoglo C4271 Luminous Carpet Stair Nosing
C4271 (Black)
Ecoglo C4261 Luminous Carpet Stair Nosing
C4261 (Grey)
Ecoglo C4251 Luminous Carpet Stair Nosing
C4251 (Yellow)

General Information

  • Install with polyurethane adhesive and mechanical fasteners.
  • Supplied with pre-drilled countersunk holes with stainless steel fasteners and concrete nylon anchors included. Standard hole location is 2″ from each end and approx. 12″ apart.
  • Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
  • Inserts Attached or Unattached – Unattached is recommended for on-site cutting. Inserts are installed with a premium polyurethane adhesive
  • Weight: 0.57 lbs/ft.


Aluminum Finish

  • 6063-T5 Aluminum with Clear or Black Anodized Finish. (Anodized to Type 2, Class 1. 20 microns thickness)
  • Light Bronze and Dark Bronze Anodize finishes are available at additional cost.
Ecoglo C4-E20 Luminescent Carpet Stair Nosing Dimensions
Engineered for Durability
  • Manufactured using Ecoglo’s patented process which produces the most durable and highly efficient photoluminescent product available.
  • Unique ridges in the photoluminescent strips protect it from most abrasive wear. They provide slip resistance while still allowing the product to be easily cleaned.
  • The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
  • The thick anodized finish is aesthetically pleasing, prevents corrosion, and is extremely hard and abrasion resistant. The anodized aluminum surface is harder than pure aluminum, second only to diamonds hard crystalline structure.
  • Tested to accelerated UV/Weathering Exposure, Salt Spray Resistance, Freeze-Thaw Resistance and Washability, Ecoglo® products easily passed with excellent results.
Step Edge Safety
  • The color contrasting the non-slip material with advanced photoluminescent technology provides step edge visibility in all light conditions.
  • The unique ridges in the Ecoglo® photoluminescent strips and the integrated anti-slip contrast strips provide all-weather slip resistance.
Environmentally Friendly Photoluminescent Cast In Place Stair Nosing

Photos

Ecoglo C4271 Luminous Carpet Stair Nosing
C4171 (Black)
Ecoglo C4261 Luminous Carpet Stair Nosing
C4161 (Grey )
Ecoglo C4251 Luminous Carpet Stair Nosing
C4151 (Yellow)
Ecoglo C4-E30 Luminous Carpet Stair Nosing in Dark
C4-E20 (In Dark)

Leed Data

Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Benefits And Technical Data

Ecoglo C4-E20 meets or exceeds the performance criteria specified in the following tests or standards:

Brightness
High visibility in dark or light conditions.
  • ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
  • DIN 67510 Part 1, Phosphorescent Pigments and Products: Measurement and identification by the manufacturer.
  • ISO 17398:2004 Clause 7.11, Safety Colors and Safety Signs- Classification, Performance and Durability of Safety Signs.
UV Stability
High durability indoors and outdoors.
  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Abrasion Resistance
Hard wearing.
  • ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM B 244-97, Test Methods for Measurement of Anodic Coatings on Aluminum and other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments.
  • ASTM B137-95(2000), Test Method for Measurement of Coating Mass per Unit Area of Anodically Coated Aluminum.
  • ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.
Washability
Easy Cleaning.
  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.
  • ASTM B136-84(1998), Standard Test Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum.
Radioactivity
No radioactivity or toxicity.
  • ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity.
  • Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.
Flammability
Does not burn.
  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.