G5001 Photoluminescent Guidance Strip
Ecoglo®’s G5001 Photoluminescent Guidance Strip measures 1” wide and is UL 1994 listed. This luminous egress path marking product has been expertly engineered to provide excellent perimeter visibility in all lighting conditions. After just a few minutes of charge from either a natural or artificial light source, you can depend on Ecoglo®’s luminous egress path marking product to shine brightly for hours, creating a safe, easy to follow egress passage. Easy to install, either in a wall mounted or floor mounted application, our photoluminescent guidance strip requires no power and very little maintenance.
For all areas required by code to have luminous egress path markings, rely on Ecoglo® to bring you the best in value and performance.
Downloads:
General Information
- Install with premium polyurethane adhesive.
- Available in cut to length sizes for installation on step edge. Additional costs will apply.
- Standard lengths are 8ft and 10ft.
- Weight: 0.056 lbs/ft.
Engineered for Durability
- Designed with longevity in mind, Ecoglo’s photoluminescent guidance strips are manufactured using the latest technology, to ensure lifelong durability. Our patented manufacturing process gives you the advantage of having the most durable, and highly efficient photoluminescent guidance markings available.
- The unique ridge design protects the luminous guidance strips from even the most abrasive wear and tear. Consequently, Ecoglo’s photoluminescent guidance strips provide long-lasting, reliable photoluminescent egress solutions.
Installed Durability
- The rigid aluminum base spreads any applied load over a greater area of installation adhesive. Installation with a premium polyurethane adhesive/sealant is extremely durable, moisture resistant, and works very well on both smooth and textured surfaces.
For Indoor Use and Outdoor Use
- Tested to accelerated UV/weathering exposure, and proven to be highly resistant to the effects of UV/weathering.
- The loss in performance is less than can be detected by the human eye when subjected to 6000 hours of UV exposure, which is similar to 30 years of outdoor exposure.
- The polymer used in Ecoglo’s patented process is “long chain” which forms a strong UV resistant product when bonding.
Environmentally Friendly
- Ecoglo is proud to offer the most environmentally friendly photoluminescent guidance strips on the market. Our glow-in-the-dark strips require zero energy to function and qualify for LEED points.
- Our photoluminescent guidance strips are both non-toxic and non-radioactive. Our products are made completely out of recyclable material, which means you won’t have to pay disposal costs at the end of their lifecycle.
Leed Data
Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
MR Credit 4: Recycled Content
Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1
- Products are Aluminum based and 100% recyclable.
MR Credit 4: Recycled Content
- Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.
Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1
Building, Fire, and Life Safety Codes
The Ecoglo G5001 meets the following Building, Fire & Life Safety Codes:
- IBC/IFC 2009, 2012 (Section 1024 – Luminous Egress Path Markings) and 2015 (Section 1025)
- NFPA 101-2009 and 170-2009
- NYC LL 141 of 2013 (Section BC 1024 Luminous Egress Path Markings)
- NYC LL 26 of 2004 Reference Standard 6-1
- California Building Code Section 1024 Exit Passageways
- Connecticut State Fire Safety Code Section 1026 Floor Proximity Egress Path Markings
Benefits And Technical Data
Ecoglo G5001 meets or exceeds the performance criteria specified in the following tests or standards:
Brightness
High visibility in dark or light conditions.
- ASTM E2073-19a Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
- DIN 67510 Part 1 Phosphorescent Pigments and Products: Measurement and identification by the manufacturer.
- ISO 17398:2004 Clause 7.11 Safety Colors and Safety Signs- Classification, Performance and Durability of Safety Signs.
UV Stability
High durability indoors and outdoors.
- ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
- Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
- Freeze-Thaw Resistance: ASTM C1026-87 Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Abrasion Resistant Stair Nosing
Hard wearing.
- ASTM D1242-95a Standard Test Methods for Resistance of Plastic Materials to Abrasion.
- ASTM F510-14 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
- JIS H8682-1 Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Abrasive-wheel-wear abrasion resistance test.
Washability
Easy Cleaning.
- ASTM D4828-94 (2016) Standard Test Methods for Practical Washability of Organic Coatings.
Radioactivity
No radioactivity or toxicity.
- ASTM D3648-14 Standard Practices for the Measurement of Radioactivity.
- Toxicity: Bombardier SMP 800-C Toxic Gas Generation Test.
Flammability
Does not burn
- ASTM E162-16 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
- ASTM D635-18 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
- FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.