RF7C-N30 Non Slip Resilient Floor Nosing​

Ecoglo®’s expertly engineered RF7C-N30 Anodized Aluminum Resilient Flooring Stair nosing brings you the best cost-effective solution for enhancing the safety of your facility’s stairways, while modernizing the look and feeling of your building. The integrally bonded non-slip strip provides excellent non-slip protection in all conditions, and is available in 3 colors to provide a stark color contrast, enhancing step edge visibility. Our patented manufacturing process ensures an extremely durable aluminum stair nosing, which can withstand the wear and tear of heavy foot traffic. This non-slip stair nosing is designed specially for use on resilient floorings, such as vinyl, linoleum, rubber, wood, and cork.

The RF7C-N30 non-slip stair tread is constructed with an 85 degree angle to allow for a tight, flush installation

Downloads:

Ecoglo RF7C-N30 Anti-Slip Resilient Flooring Treads
Ecoglo RF7C170 Anti-Slip Resilient Flooring Tread
RF7C170 (Black)
Ecoglo RF7C160 Anti-Slip Resilient Flooring Tread
RF7C160 (Grey)
Ecoglo RF7C150 Anti-Slip Resilient Flooring Tread
RF7C150 (Yellow)

General Information

  • Installs flush with resilient flooring using adhesive and mechanical fasteners.
  • Countersunk pre-drilled holes. Includes stainless steel fasteners and concrete nylon anchors. Standard location is 2″ from each end and approx. 12″ apart.
  • Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
  • Inserts are supplied unattached. Inserts are installed over the mechanical fasteners using a polyurethane adhesive (included). Inserts can be cut using a shear. Aluminum nosings are cut with a saw Cutting inserts with saw will damage the saw blade.
  • Weight: 0.632 lbs/ft.
Ecoglo RF7C-N30 Resilient Flooring Stair Nosing Dimensions
Engineered for Durability
  • The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
  • The thick anodized finish is aesthetically pleasing, prevents corrosion, and is extremely hard and abrasion resistant. The anodized aluminum surface is harder than pure aluminum, second only to diamonds hard crystalline structure.
Superior Step Edge Safety
  • The color contrasting the non-slip material provides excellent step edge visibility
for Indoor and Outdoor Use
  • Tested to accelerated UV/weathering exposure, Salt Spray Resistance, Freeze-Thaw Resistance and Washability. Ecoglo products easily passed with excellent results.
Environmentally Friendly Non Slip Resilient Floor Nosing​

Leed Data

Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Benefits And Technical Data

Ecoglo RF7C-N30 meets or exceeds the performance criteria specified in the following tests or standards:

UV Stability

High durability indoors and outdoors.

  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87(1996) Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Abrasion Resistant Stair Nosing
Hard wearing.
  • ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM B 244-97, Test Methods for Measurement of Anodic Coatings on Aluminum and other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments.
  • ASTM B137-95(2000), Test Method for Measurement of Coating Mass per Unit Area of Anodically Coated Aluminum.
  • ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.
Washability
Easy Cleaning.
  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.
  • ASTM B136-84(1998), Standard Test Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum.
Slip Resistant Aluminum Stair Nosing

Reduces Slips

  • UL410 Standard for Slip Resistance of Floor Surface Materials
  • AS/NZS 4586 Slip Resistance Classification of New Pedestrian Surface Materials.
Flammability

Does not burn.

  • ASTM E162-16 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-18 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.