CAD DETAILS BIM READY    |    DOWNLOAD CATALOG Contact us:    888-679-4022   |    info@ecoglo.us

Ecoglo

RF7B-N30 Resilient Floor Nosing​

The RF7B-N30 Non-Slip Anodized Aluminum Stair Nosing is designed to be installed flush with resilient flooring. It provides step edge color contrast, long-lasting anti-slip protection and beautiful appearance. The RF7B-N30 has a 90 degree angle

Environmentally Friendly
  • LEED points qualified
  • Recyclable; No disposable cost
Step Edge Safety
  • The color contrasting the non-slip material provides excellent step edge visibility
RF7B-E40_Resilient Flooring Nosing_RF7B170-Black
Engineered for Durability
  • The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
  • The thick anodized finish is aesthetically pleasing, prevents corrosion, and is extremely hard and abrasion resistant. The anodized aluminum surface is harder than pure aluminum, second only to diamonds hard crystalline structure.
For Indoor Use and Outdoor Use
  • Tested to accelerated UV/weathering Exposure, Salt Spray Resistance, Freeze-Thaw Resistance and Washability. Ecoglo products easily passed with excellent results.

General Information

  • Installs flush with resilient flooring using adhesive and mechanical fasteners.
  • Countersunk pre-drilled holes. Includes stainless steel fasteners and concrete nylon anchors. Standard location is 2″ from each end and approx. 12″ apart.
  • Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
  • Inserts are supplied unattached. Inserts are installed over the mechanical fasteners using a polyurethane adhesive (included). Inserts can be cut using a shear. Aluminum nosings are cut with a saw Cutting inserts with saw will damage the saw blade.
  • Weight: 0.632 lbs/ft.

Aluminum Finish:
  • Available in Clear Anodized Aluminum Finish.
  • Black, Light Bronze and, Dark Bronze Anodize finishes are available at an additional cost.

*Made in USA

Product Models

RF7B-E40_Resilient Flooring Nosing_RF7B170-Black
RF7B170
RF7B-E40_Resilient Flooring Nosing_RF7B160-Grey
RF7B160
RF7B-E40_Resilient Flooring Nosing_RF7B150-Yellow
RF7B150

Dimensions

RF7B-E40_Resilient Flooring Nosing_Dimension

Photos

N20-Non-Slip-Strips_N2070-black_Installed
N20-Non-Slip-Strips_N2060-grey_installed
N20-Non-Slip-Strips_N2050-yellow_installed

Leed Data

Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Attachments

Benefit and Technical Details

Ecoglo RF7B-N30 meets or exceeds the performance criteria specified in the following tests or standards:

UV Stability
High durability indoors and outdoors.
  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Slip Resistant
Reduces slips.
  • UL410, Standard for Slip Resistance for Floor Surface Materials.
  • AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials.
Abrasion Resistance
Hard wearing.
  • ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM B 244-97, Test Methods for Measurement of Anodic Coatings on Aluminum and other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments.
  • ASTM B137-95(2000), Test Method for Measurement of Coating Mass per Unit Area of Anodically Coated Aluminum.
  • ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.
Washability
Easy Cleaning.
  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.
  • ASTM B136-84(1998), Standard Test Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum.
Flammability
Does not burn.
  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.