CAD DETAILS BIM READY    |    DOWNLOAD CATALOG Contact us:    888-679-4022   |    info@ecoglo.us

N30 Series Non-Slip Strips

The 2” Wide N30 Series Non-Slip Strips provide step edge color contrast and long-lasting anti-slip protection.
Environmentally Friendly
  • LEED points qualified
  • Recyclable; No disposable cost
Step Edge Safety
  • The color contrasting the non-slip material provides all-weather slip resistance.
Engineered for Durability
  • The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
N30-Series_Non-Slip-Strips_N3070-Black
Installed Durability
  • The rigid aluminum base spreads any applied load over a greater area of installation adhesive. Installation with a premium polyurethane adhesive/sealant is extremely durable, moisture resistant, and works very well on both smooth and textured surfaces.
For Indoor Use and Outdoor Use
  • Tested to accelerated UV/weathering Exposure, Salt Spray Resistance, Freeze-Thaw Resistance and Washability. Ecoglo products easily passed with excellent results.

General Information

  • Install with premium polyurethane adhesive.
  • Option for mechanical fasteners.
  • Do not use mechanical fasteners when installing outdoors.
  • Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
  • Weight: 0.164 lbs/ft.

Product Models

N30-Series_Non-Slip-Strips_N3070-Black
N3070
N30-Series_Non-Slip-Strips_N3060-Grey
N3060
N30-Series_Non-Slip-Strips_N3050-Yellow
N3050

Dimensions

N30-Series_Non-Slip-Strips_Dimension

Photos

N30-Series_Non-Slip-Strips_N3070-Black_Installed
N30-Series_Non-Slip-Strips_N3060-Grey_Installed
N30-Series_Non-Slip-Strips_N3050-Yellow_Installed

Leed Data

Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Benefit and Technical Details

Ecoglo N30 Series meets or exceeds the performance criteria specified in the following tests or standards
UV Stability
High durability indoors and outdoors.
  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Slip Resistant
Reduces slips.
  • UL410, Standard for Slip Resistance for Floor Surface Materials.
  • AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials.
Abrasion Resistance
Hard wearing.
  • ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.
Washability
Easy Cleaning.
  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.
Radioactivity
No radioactivity or toxicity.
  • ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity.
  • Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.
Flammability
Does not burn.
  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.