N20 Series Non-Slip Stair Strips

Ecoglo®’s N20 Non-Slip Stair Strip can be installed in existing stairwells with stair treads made of concrete, wood, and metal and measures 1 ½” wide. Using our recommended premium polyurethane adhesive ensures a permanent and reliable installation. The expertly engineered durability of our non-slip strips ensures your facility will be equipped with a slip-resistant and code compliant solution.

As a crucial aspect of safety, anti-slip stair treads are required by local and international building and fire codes. In addition to providing anti-slip protection, Ecoglo®’s non-slip strips provided excellent step edge visibility, by color contrasting with the stair tread.

Downloads:

Ecoglo N20 Slip Resistant Stair Strips
Ecoglo N2070 Anti Slip Black Stair Strip
N2070 (Black)
Ecoglo N2060 Anti Slip Grey Stair Strip
N2060 (Grey)
Ecoglo N2050 Anti Slip Yellow Stair Strip
N2050 (Yellow)

General Information

  • Install with premium polyurethane adhesive.
  • Option for mechanical fasteners.
  • Do not use mechanical fasteners when installing outdoors.
  • Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
  • Weight: 0.122 lbs/ft.
Ecoglo N20 Series Slip Resistant Stair Strip Dimensions
Engineered for Durability
  • The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
Step Edge Safety
  • The color contrasting the non-slip material provides all-weather slip resistance.
for Indoor use and Outdoor Use
  • Tested to accelerated UV/weathering Exposure, Salt Spray Resistance, Freeze-Thaw Resistance and Washability. Ecoglo products easily passed with excellent results.
Environmentally Friendly Non Slip Stair Strips

Photos

Installed Ecoglo N2070 Non Slip Black Stair Strip
N2070 (Black)
Installed Ecoglo N2060 Non Slip Stair Strip
N2060 (Grey)
Ecoglo N2050 Non Slip Stair Strip
N2050 (Yellow)

Leed Data

Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Benefits And Technical Data

Ecoglo N20 Series meets or exceeds the performance criteria specified in the following tests or standards:
UV Stability

High durability indoors and outdoors.

  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87 Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Abrasion Resistance

Hard Wearing 

  • ASTM D1242-95a Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM F510-14 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1 Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Abrasive-wheel-wear abrasion resistance test.
Washability

Easy Cleaning

Slip Resistance
Reduces slips.
  • UL410, Standard for Slip Resistance for Floor Surface Materials.
  • AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials.
Radioactivity
No radioactivity or toxicity.
  • ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity.
  • Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.
Flammability
Does not burn.
  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.