F8-N30 Flat Stair Nosing

The F8-N30 Non-Slip Anodized Stair Nosings provide step edge color contrast, long-lasting anti-slip protection and beautiful appearance. The F8-N30 provide an affordable way to renovate and modernize stairways and improve stairway safety. They can be used on a range of substrates including concrete, timber, tiles, steel, checker plate and thin carpeted stairs.

Environmentally Friendly

LEED points qualified
Recyclable; No disposable cost

Step Edge Safety

The color contrasting the non-slip material provides step edge visibility

Engineered for Durability

The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
The thick anodized finish is aesthetically pleasing, prevents corrosion, and is extremely hard and abrasion resistant. The anodized aluminum surface is harder than pure aluminum, second only to diamonds hard crystalline structure.

For Indoor Use and Outdoor Use

Tested to accelerated UV/weathering exposure, Salt Spray Resistance, Freeze-Thaw Resistance and Washability. Ecoglo products easily passed with excellent results.

General Information

Install with polyurethane adhesive and mechanical fasteners, or adhesive only.
Supplied with pre-drilled countersunk holes. Includes stainless steel fasteners and concrete nylon anchors. Standard location is 2″ from each end and approx. 12″ apart.
Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
Inserts Attached or Unattached – Unattached is recommended for on-site cutting. Inserts are installed with a premium polyurethane adhesive.
Weight: 0.482 lbs/ft.

Aluminum Finish:

6063-T5 Aluminum, Mill Finish or with Clear or Black Anodized Finish. (Anodized to Type 2, Class 1. 20 microns thickness)
Light Bronze and, Dark Bronze Anodize finishes are available at an additional cost

*Made in USA

Product Models

Dimensions

Photos

Attachments

Leed Data

Qualifies for LEED Points

MR Credit 2: Construction Waste Management Divert from Land Fill

Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content

Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Benefit and Technical Details

Ecoglo F8-N30 meets or exceeds the performance criteria specified in the following tests or standards:

UV Stability

High durability indoors and outdoors.

ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling

Slip Resistant

Reduces slips.

UL410, Standard for Slip Resistance for Floor Surface Materials.
AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials.

Abrasion Resistance

Hard wearing.

ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
ASTM B 244-97, Test Methods for Measurement of Anodic Coatings on Aluminum and other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments.
ASTM B137-95(2000), Test Method for Measurement of Coating Mass per Unit Area of Anodically Coated Aluminum.
ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.

Washability

Easy Cleaning.

ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.
ASTM B136-84(1998), Standard Test Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum.

Flammability

Does not burn.

ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.