F5B-N20 Non-Slip Flat Stair Nosing

Ecoglo®’s F5B-N20 Non-Slip Anodized Stair Nosings provide step edge color contrast, long-lasting anti-slip protection and a sleek, modern appearance. This aluminum stair nosing has been integrally bonded with our N Series Non-Slip Strips to provide expertly engineered non-slip protection. Our non-slip stair nosing works well to retroactively enhance step-edge safety in your facility, or can be used for new construction projects.

For all the stair treads within your building, this product can be easily installed on concrete, time, tiles, steel, checker plate and thin carpeted stairs. This aluminum anti-slip stair nosing can be applied using a combination of adhesive and mechanical fasteners, or adhesive alone, for a permanent and reliable installation.

Downloads:

General Information

Install with polyurethane adhesive and mechanical fasteners, or adhesive only.
Supplied with pre-drilled countersunk holes. Includes stainless steel fasteners and concrete nylon anchors. Standard location is 2″ from each end and approx. 12″ apart.
Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
Inserts Attached or Unattached – Unattached is recommended for on-site cutting. Inserts are installed with a premium polyurethane adhesive.
Weight: 0.37 lbs/ft.

Aluminum Finish:

Available in Clear Anodized Aluminum Finish.
Black, Light Bronze and, Dark Bronze Anodize finishes are available at an additional cost.

Engineered for Durability

The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
The thick anodized finish is aesthetically pleasing, prevents corrosion, and is extremely hard and abrasion resistant. The anodized aluminum surface is harder than pure aluminum, second only to diamonds hard crystalline structure.

Step Edge Safety

The color contrasting the non-slip material provides excellent step edge visibility

for Indoor and Outdoor Use

Tested to accelerated UV/Weathering Exposure, Salt Spray Resistance, Freeze Thaw Resistance and Washability. Ecoglo^® products easily passed with excellent results.

Environmentally Friendly Non Slip Flat Stair Nosing

LEED points qualified
Recyclable; No disposable cost

Photos

Leed Data

Qualifies for LEED Points

MR Credit 2: Construction Waste Management Divert from Land Fill

Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content

Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Benefits And Technical Data

Ecoglo F5B-N20 Series Non-Slip Step Edge Marking Strips meets or exceeds the performance criteria specified in the following tests or standards::

UV Stability

High durability indoors and outdoors.

ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
Freeze-Thaw Resistance: ASTM C1026-87(1996) Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling

Abrasion Resistant Stair Nosing

Hard wearing.

ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
ASTM B 244-97, Test Methods for Measurement of Anodic Coatings on Aluminum and other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments.
ASTM B137-95(2000), Test Method for Measurement of Coating Mass per Unit Area of Anodically Coated Aluminum.
ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.

Washability

Easy Cleaning.

ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.
ASTM B136-84(1998), Standard Test Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum.

Slip Resistant Aluminum Flat Stair Nosing

Reduces Slips

UL410 Standard for Slip Resistance of Floor Surface Materials
AS/NZS 4586 Slip Resistance Classification of New Pedestrian Surface Materials.

Flammability

Does not burn.

ASTM E162-16 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
ASTM D635-18 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.