S4-N30 Non-Slip Cast in Place Stair Nosing

The S4-N30 Non-Slip Anodized Stair Nosing provide step edge color contrast, long-lasting anti-slip protection and beautiful appearance. The S4-N30 provides an affordable way to renovate and modernize worn stairways and improve stairway safety. Our Cast-In Place anti-slip stair nosings are the perfect solution for bringing your new build up to code. Ecoglo’s Cast-In Place Nosings are installed directly into wet concrete, flush with the concrete floor. This neat, smooth installation decreases the risk of slips and trips. The S4-N30 Cast in Place Nosings are installed into wet concrete and can be used on concrete stairs, concrete-filled steel pan stairs, and precast concrete stairs. Ecoglo’s anti-slip nosings provide long-lasting non-slip protection. The Expertly engineered polymer withstands UV weathering and is durable enough for both indoor and outdoor long-term installations. The hard-wearing surface of our non-slip stair nosing is abrasion resistant, protecting your Ecoglo Cast in place nosing from scratches or additional damages.

S4-N30 Non Slip Cast In Place Nosing
Environmentally Friendly Non-Slip Cast in Place Stair Nosing
Step Edge Safety
  • The color contrasting the non-slip material provides excellent step edge visibility
Engineered for Durability
  • The hard-wearing silicon carbide non-slip material is integrally bonded to the aluminum substrate. Thousands of people can walk on it with no signs of wear and tear.
For Indoor Use and Outdoor Use
  • Non-Slip Cast in Place Stair Nosings are tested to accelerated UV/weathering Exposure,Salt Spray Resistance, Freeze-Thaw Resistance and Washability. Ecoglo products easily passed with excellent results.

General Information

  • Install into wet concrete. Used on concrete stairs, concrete-filled steel pan stairs, and pre-cast concrete stairs.
  • Available in cut to length sizes. (Tolerance +or- 1/8”) Standard lengths are 8ft and 10ft.
  • Inserts Attached or Unattached – Inserts unattached can be installed later to ensure the product is clean and has not been damaged during construction. Inserts are installed with a premium polyurethane adhesive.
  • A clear protective tape wraps around the product to keep the product clean during installation. To remove, cut the tape along the edges and peel away.
  • Weight: 0.494 lbs/ft.

Aluminum Finish:
  • 6063-T5 Mill finish aluminum with acrylic lacquer finish to prevent corrosion.

*Made in USA

Product Colors




Leed Data

Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Benefit and Technical Data

Ecoglo S4-N30 Series Cast in Place Stair Nosing meets or exceeds the performance criteria specified in the following tests or standards:

UV Stability
High durability indoors and outdoors.
  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Slip Resistant
Reduces slips.
  • UL410, Standard for Slip Resistance for Floor Surface Materials.
  • AS/NZS 4586-1999, Slip Resistance Classification of New Pedestrian Surface Materials.
Abrasion Resistance
Hard wearing.
  • ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.
Easy Cleaning.
  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.
Does not burn.
  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.