H5001 Photoluminescent Handrail Marking

Ecoglo®’s expertly design H5001 Photluminescent handrail marking is fast-charging, long-lasting and built to last. Our patented manufacturing process brings you the best in luminous egress path marking products, ensuring you get a product you can trust. Once the power goes out, the H5001 luminous egress handrail marking illuminates on of the most important aspects of your egress path, enhancing egress speeds and guiding patrons to safety without second guessing. 

Ecoglo®’s H5001 photoluminescent handrail marking measures 1” and is ideal for most handrails in areas required by code to have luminous egress path markings. 

Downloads:

Ecoglo H5001 Luminescent Handrail Strip

General Information

  • Install with premium polyurethane adhesive.
  • Weight: 0.056 lbs/ft.
Ecoglo H5001 Luminous Handrail Marking Dimensions
H5001 Dimensions
End-cap for Ecoglo H5001 Luminous Handrail Marking
Accessories - HEC51 Endcap
Engineered for Durability
  • Manufactured using Ecoglo’s patented process which produces the most durable and highly efficient photoluminescent product available.
  • Unique ridges in the photoluminescent strips protect it from most abrasive wear.
Installed Durability
  • The rigid aluminum base spreads any applied load over a greater area of installation adhesive. Installation with a premium polyurethane adhesive/sealant is extremely durable, moisture resistant, and works very well on both smooth and textured surfaces.
For Indoor Use and Outdoor Use
  • Tested to accelerated UV/weathering exposure, and proven to be highly resistant to the effects of UV/weathering.
  • The loss in performance is less than can be detected by the human eye when subjected to 6000 hours of UV exposure, which is similar to 30 years of outdoor exposure.
  • The polymer used in Ecoglo’s patented process is “long chain” which forms a strong UV resistant product when bonding.
Environmentally Friendly Photoluminescent Handrail Markings

Photos

Ecoglo H5001 Photoluminescent Handrail Strip
H5001
Ecoglo's H5001 Luminous Handrail Marking Strip
H5001
Ecoglo's glow in the dark H5001 Handrail Marker at night
H5001 (In Dark)

Leed Data

Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Benefits And Technical Data

Ecoglo H5001 meets or exceeds the performance criteria specified in the following tests or standards:
Brightness
High visibility in dark or light conditions.
  • ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
  • DIN 67510 Part 1, Phosphorescent Pigments and Products: Measurement and identification by the manufacturer.
  • ISO 17398:2004 Clause 7.11, Safety Colors and Safety Signs- Classification, Performance and Durability of Safety Signs.
UV Stability
High durability indoors and outdoors.
  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87(1996), Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Abrasion Resistance
Hard wearing.
  • ASTM D1242-95a, Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM F510-93(2004), Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1:1999, Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Wheel wear test.
Washability
Easy Cleaning.
  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.
Radioactivity
No radioactivity or toxicity.
  • ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity.
  • Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.
Flammability
Does not burn.
  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.