RIGID VINYL SERIES – WALL MOUNTED PHOTOLUMINESCENT PATHMARKING DOOR SIGNS

The Rigid Vinyl Series – Wall Mounted Photoluminescent Pathmarking Signs provide visibility and indicate direction of egress in all light conditions. The signs are designed to be installed on the wall beside egress doors with a 3M Foam tape. The photoluminescent signs are visible for many hours after the lights go out, having been charged from sunlight or artificial light.

UL-logo-100x50

The Ecoglo Rigid Vinyl Series – Wall Mounted Pathmarking Door Signs meets the following Building, Fire & Life Safety Codes:

  • IBC/IFC 2009, 2012 (Section 1024 – Luminous Egress Path Markings) and 2015 (Section 1025)
  • NFPA 101-2009 and 170-2009
  • NYC LL 141 of 2013 (Section BC 1024 Luminous Egress Path Markings)
  • NYC LL 26 of 2004 Reference Standard 6-1
  • California Building Code Section 1024 Exit Passageways
  • Connecticut State Fire Safety Code Section 1026 Floor Proximity Egress Path Markings
Installation Instructions

  • Installs easily with 3M foam tape. Some surface preparation is required to ensure a strong bond.
  • The foam tape allows for a strong installation on a variety of surfaces. The rigidity of the product spreads any applied load over a greater area of installation adhesion.
Benefits and Technical Details: Ecoglo Rigid Vinyl Series – Wall Mounted Pathmarking Door Signs meets or exceeds the performance criteria specified in the following tests or standards:

Brightness

High visibility in dark or light conditions.

  • ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
  • ISO 17398:2004 Clause 7.11, Safety Colors and Safety Signs- Classification, Performance and Durability of Safety Signs
  • UL 1994 Listed – IMZI.SA3353
  • ULC 572 Listed – IMZI7.SA3353

Washability

Easy Cleaning.

  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.

Radioactivity

No radioactivity or toxicity.

  • Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.

Flammability

Does not burn.

  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.