Aluminum Base Series – R_02012 Photoluminescent Pathmarking Signs

Ecoglo®’s R_02012 Aluminum Base Series Photoluminescent Path Marking Signs provide clear direction towards the exit, enhancing the ease of egress. Available in 8 different directional signs, this luminous egress path marking product gives you the versatility you need to mark the egress path in your building. Our exit signs are easily visible in the light, to provide visual direction. After gaining a charge from natural or artificial light these glow in the dark exit signs cut through the darkness to provide clear egress instructions, even after the power has gone out. Our aluminum base series exit signs are installed with premium polyurethane adhesive.

Weight: 0.172 lbs/sign

Downloads:

Aluminum Base Series Luminous Exit Path Marking Sign

Photos

Ecoglo RDO2012 Exit Down And To The Left Photoluminescent Sign
RDO2012
Ecoglo RAO2012 Exit To The Right Photoluminescent Sign
RAO2012
Ecoglo RAO2012 Glow in the Dark Exit To The Right Sign
RAO2012 (In Dark)

Leed Data

Qualifies for LEED Points
MR Credit 2: Construction Waste Management Divert from Land Fill
  • Products are Aluminum based and 100% recyclable.

MR Credit 4: Recycled Content
  • Products are Aluminum based and approximately 20% of the aluminum content in an Ecoglo secondary billet specification is recycled scrap.

Ecoglo’s Recommended Installation Adhesive has low VOC’s and qualifies for Indoor Environmental Quality credits for low emitting materials: EQc4.1

Building Fire and Life Safety Codes

The Ecoglo R_02012-G250R Path Marking Signs meets the following Building, Fire & Life Safety Codes:

  • IBC/IFC 2009, 2012 (Section 1024 – Luminous Egress Path Markings) and 2015 (Section 1025)
  • NFPA 101-2009 and 170-2009
  • NYC LL 141 of 2013 (Section BC 1024 Luminous Egress Path Markings)
  • NYC LL 26 of 2004 Reference Standard 6-1
  • California Building Code Section 1024 Exit Passageways
  • Connecticut State Fire Safety Code Section 1026 Floor Proximity Egress Path Markings

Benefits And Technical Data

Ecoglo R_02012 meets or exceeds the performance criteria specified in the following tests or standards:

Brightness Path Marking Signs
High visibility in dark or light conditions.
  • ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
  • DIN 67510 Part 1, Phosphorescent Pigments and Products: Measurement and identification by the manufacturer.
  • ISO 17398:2004 Clause 7.11, Safety Colors and Safety Signs- Classification, Performance and Durability of Safety Signs.
UV Stability

High durability indoors and outdoors.

  • ASTM G155-04 Cycle 1 2000hrs, Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Nonmetallic Materials.
  • Salt Spray Resistance: ASTM B117-97 500hrs, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Freeze-Thaw Resistance: ASTM C1026-87 Standard Test Method for Measuring the Resistance of Ceramic Tile to Freeze-Thaw Cycling
Abrasion Resistance

Hard Wearing 

  • ASTM D1242-95a Standard Test Methods for Resistance of Plastic Materials to Abrasion.
  • ASTM F510-14 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method.
  • JIS H8682-1 Test methods for abrasion resistance of anodic oxide coatings on aluminum and aluminum alloys- Abrasive-wheel-wear abrasion resistance test.
Washability

Easy Cleaning

Radioactivity
No radioactivity or toxicity.
  • ASTM D3648-2004, Standard Practices for the Measurement of Radioactivity.
  • Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.
Flammability
Does not burn.
  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.
  • ASTM D635-03, Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
  • FAA AC 23.2 Paragraph 4.b, Horizontal Burn Test.