G250R-H PHOTOLUMINESCENT HANDRAIL STRIPS

The G250R-H Photoluminescent Handrail Strips are designed to clearly mark handrails and provide visibility in all light conditions. The G250R-H is ideal for areas required by code to have luminous path markings. The 1″ wide G250R-H is UL 1994 listed and meets the requirements of building codes, fire codes and life safety codes across North America and around the world.

UL-logo-100x50

The Ecoglo G250R-H meets the following Building, Fire & Life Safety Codes:

  • IBC/IFC 2009, 2012 (Section 1024 – Luminous Egress Path Markings) and 2015 (Section 1025)
  • NFPA 101-2009 and 170-2009
  • NYC LL 141 of 2013 (Section BC 1024 Luminous Egress Path Markings)
  • NYC LL 26 of 2004 Reference Standard 6-1
  • California Building Code Section 1024 Exit Passageways
  • Connecticut State Fire Safety Code Section 1026 Floor Proximity Egress Path Markings
  • Curved Photoluminescent Rigid Vinyl with 3M tape.
  • 1” x 47” length
  • Weight: 0.133167 lbs/piece
  • Round corners of all open ends to eliminate sharp corners using Corner Cutters R10 (supplied by Ecoglo)
  • Installs easily with 3M double sided tape
  • Pieces cut easily using hand shears.

Installed Durability:

  • The aggressive 3M tape provides a strong bond and the rigidity of the product spreads any applied load over a greater area of installation adhesion.
Benefits and Technical Details: Ecoglo G250R-H meets or exceeds the performance criteria specified in the following tests or standards:

Brightness

High visibility in dark or light conditions.

  • ASTM E2073-02, Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings.
  • ISO 17398:2004 Clause 7.11, Safety Colors and Safety Signs- Classification, Performance and Durability of Safety Signs.
  • UL 1994 Listed – IMZI.SA3353
  • UKLC 572 Listed – IMZI7.SA3353

Washability

Easy Cleaning.

  • ASTM D4828-94(2003), Standard Test Methods for Practical Washability of Organic Coatings.

Radioactivity

No radioactivity or toxicity.

  • Toxicity: Bombardier SMP 800-C (2000), Toxic Gas Generation Test.

Flammability

Does not burn.

  • ASTM E162-02, Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source.

Corner Cutter R10
corner cutters R10